S83.70-4673-08
1 | Cover | 4 | Bracket | N33/3 | Hot water stationary heater (STH) control unit | ||
2 | Screw | 5 | Electrical connector | ||||
3 | Electrical connector | 6 | Cover |
Danger ! | Risk of explosion caused by fuel vapors igniting, risk of poisoning caused by inhaling combustible gases and risk of injury caused by burns during and after operation of heater unit | Do not operate stationary heater, auxiliary heater or engine with heater booster in closed rooms or when refueling. Allow heater unit to cool down after operation and wear protective gloves. | |
| Remove/install | ||
1 | Remove heater with bracket (4) | ||
2 | Remove electrical connectors (3) from bracket (4) | ||
3 | Remove bolts (2) | ||
4 | Take off cover (1) | ||
5 | Disconnect electrical connector (5) | ||
6 | Remove warm water stationary heater (STH) (N33/3) control unit | Installation: Check for correct seating. | |
7 | Transfer cover (1) | Only when replacing warm water stationary heater (STH) (N33/3) control unit . | |
To do so, push cover (6) in direction of arrow. | |||
8 | Install in the reverse order |
Powiązane dokumenty
- ar8370s5330e
- as8370z000201a Niebezpieczeństwo wybuchu oparów paliwa, niebezpieczeństwo zatrucia na skutek wdychania spalin i niebezpieczeństwo zranienia na skutek poparzenia podczas lub po fazie grzania.