ar8370s5758e

Removing and installing spark plug

Typ ar · temat 83.70 · wersja 0100 · 2014-09-10

Dotyczy: MODEL 447 with CODE H12 (Auxiliary hot-water heater)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.70 Ogrzewanie w czasie postoju, dodatkowe, nagrzewnica dodatkowa — Seria 447

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.25 Ogrzewanie postojowe/ ogrzewanie dodatkowe › 39.25.30 Nagrzewnica — Seria 447

AR83.70-S-5758E

Removing and installing spark plug

19.08.2014

MODEL

447

with CODE H12 (Auxiliary hot-water heater)

Removing and installing spark plug

1

Glow plug

2

Combustion air blower

3

Electrical connection

4

Seal

S83.70-4676-05

Remove/install

1

Detach combustion air blower (2) from heater

AR83.70-S-5557E

The electrical lines of combustion air blower (2) are not removed.

2

Remove electrical lines of glow plug (1) from electrical connector (3)

Installation: Make sure that slots are correctly assigned in electrical connector (3).

Wiring harness repair kit, basic

*000589139900

3

Remove glow plug (1)

Installation: Check seal (4) is in correct installation position.

4

Install in the reverse order

Check

Danger !

Risk of explosion caused by fuel vapors igniting, risk of poisoning caused by inhaling combustible gases and risk of injury caused by burns during and after operation of heater unit

Do not operate stationary heater, auxiliary heater or engine with heater booster in closed rooms or when refueling. Allow heater unit to cool down after operation and wear protective gloves.

AS83.70-Z-0002-01A

5

Perform function test of heater

Removing and installing spark plug

000 589 13 99 00

Wiring harness repair kit, basic

Powiązane dokumenty