ar8370p0015fr

Remove/install stationary heater radio remote control receiver

Typ ar · temat 83.70 · wersja 0102 · 2019-11-21

Dotyczy: Model 257 with code 228 (Additional warm water heating) with code B24 (Remote control for Auxiliary heating) Model 290 with code 228 (Additional warm water heating) with code B24 (Remote control for Auxiliary heating)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.70 Ogrzewanie w czasie postoju, dodatkowe, nagrzewnica dodatkowa — Seria 257 · Seria 290

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.25 Ogrzewanie postojowe/ ogrzewanie dodatkowe › 39.25.14 Nadajnik/odbiornik — Seria 257 · Seria 290

AR83.70-P-0015FR

Remove/install stationary heater radio remote control receiver

21.11.2019

Model

257

with code 228 (Additional warm water heating)

with code B24 (Remote control for Auxiliary heating)

Model

290

with code 228 (Additional warm water heating)

with code B24 (Remote control for Auxiliary heating)

Remove/install stationary heater radio remote control receiver

Shown on model 257

1

Catch hook

2

Electrical connector

3

Electrical connector

A6/1

Stationary heater radio remote control receiver

P83.70-5740-06

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

Remove/install

1

Remove side trim in right trunk or load compartment.


Model 290
with code 228 (Additional warm water heating)
with code B24 (Remote control for Auxiliary heating)

AR68.30-P-1185FRX

Model 257
with code 228 (Additional warm water heating)
with code B24 (Remote control for Auxiliary heating)

AR68.30-P-4800FR

2

Release catch hook (1) and guide stationary heater radio remote control receiver (A6/1) out of holder.

3

Disconnect electrical connection (2, 3).

4

Install in the reverse order.

5

Teach in stationary heater radio remote control transmitter.

When replacing the stationary heater radio remote control receiver (A6/1).

AR83.70-P-0013-01FR

Powiązane dokumenty