ar8370d5683na

Remove and install flame sensor

Typ ar · temat 83.70 · wersja 0101 · 2003-09-22

Dotyczy: MODELS 903.61 /66 /67, 904.61 /66 with CODE (H12) Hot water auxiliary heater with CODE (ZU7) National version for Canada MODELS 903.61 /66 /67, 904.61 /66 with CODE (HZ9) Heater booster, diesel engine with CODE (ZU7) National version for Canada MODELS 903.61 /66 /67, 904.61 /66 with CODE (H12) Hot water auxiliary heater with CODE (ZU8) National version for USA MODELS 903.61 /66 /67, 904.61 /66 with CODE (HZ9) Heater booster, diesel engine with CODE (ZU8) National version for USA MODELS 903.61 /62 /6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.70 Ogrzewanie w czasie postoju, dodatkowe, nagrzewnica dodatkowa — Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.25 Ogrzewanie postojowe/ ogrzewanie dodatkowe › 39.25.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

AR83.70-D-5683NA

Remove and install flame sensor

15.1.03

MODELS 903.61 /66 /67, 904.61 /66
with CODE (H12) Hot water auxiliary heater
with CODE (ZU7) National version for Canada

MODELS 903.61 /66 /67, 904.61 /66
with CODE (HZ9) Heater booster, diesel engine
with CODE (ZU7) National version for Canada

MODELS 903.61 /66 /67, 904.61 /66
with CODE (H12) Hot water auxiliary heater
with CODE (ZU8) National version for USA

MODELS 903.61 /66 /67, 904.61 /66
with CODE (HZ9) Heater booster, diesel engine
with CODE (ZU8) National version for USA

MODELS 903.61 /62 /66 /67, 904.61 /62 /66
with CODE (H12) Hot water auxiliary heater
with CODE (ZU9) National version for Mexico

MODELS 903.61 /62 /66 /67, 904.61 /62 /66
with CODE (HZ9) Heater booster, diesel engine
with CODE (ZU9) National version for Mexico

MODELS XD1, XD2, XD3, XD4, XD5, XD6, XD7 with CODE (H12) Hot water auxiliary heater

MODELS XD1, XD2, XD3, XD4, XD5, XD6, XD7 with CODE (HZ9) Heater booster, diesel engine

MODELS YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (H12) Hot water auxiliary heater

MODELS YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (HZ9) Heater booster, diesel engine

MODELS WD1, WD2, WD3, WD6, WD7 with CODE (H12) Hot water auxiliary heater

MODELS WD1, WD2, WD3, WD6, WD7 with CODE (HZ9) Heater booster, diesel engine

Remove and install flame sensor

D83.70-1275-06

1 Flame sensor

2 Plug housing

3 Control unit for auxiliary heater/heater booster

4 Cover

Remove/Install

Danger!

Risk of explosion from fuel vapors, risk of poisoning from inhaling combustion gases and risk of injury from burns during and after operation of heater unit.

Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or when refueling. Allow heater unit to cool down after operation and wear protective gloves.

AS83.70-Z-0002-01A

Danger!

Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel.

No fire, sparks, naked flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Remove heater

AR83.70-D-5302NA

2

Remove control unit for auxiliary heater/heater booster (3)

AR83.70-D-5939NA

3

Remove cover (4)

4

Unclip flame sensor lines (1) on plug housing (2)

5

Unscrew flame sensor (1)

6

Install in the reverse order

7

Check auxiliary heater/heater booster for proper operation

Powiązane dokumenty