ar8330p7812rr

Remove/install refrigerant line between evaporator and condenser

Typ ar · temat 83.30 · wersja 0101 · 2006-11-28

Dotyczy: MODEL 452.3 /4 with CODE (I01) Air conditioning Plus with CODE (I29) Air conditioning Plus (with combination filter and outside temperature indicator), smart & passion

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.30 Układ klimatyzacji — Seria 452 (modele 3**, 4**)

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.15 Klimatyzacja › 39.15.13 Przewód sztywny/elastyczny/zawór — Seria 452 (modele 3**, 4**)

AR83.30-P-7812RR

Remove/install refrigerant line between evaporator and condenser

21.11.06

MODEL 452.3 /4
with CODE (I01) Air conditioning Plus
with CODE (I29) Air conditioning Plus (with combination filter and outside temperature indicator), smart & passion

Remove/install refrigerant line between evaporator and condenser

P83.30-4345-09

1 Nut

2 Pressure line

4 Nut

3 Expansion valve

Danger!

Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant.

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been discharged.

AS83.00-Z-0001-01A

Removing

1

Remove luggage compartment pan

2

Remove battery

AR54.10-P-0005RR

3

Discharge air conditioning system

AR83.30-P-1760RR

4

Unscrew nut (1) of yoke plate and disconnect pressure line (2) from expansion valve (3)

*BA83.30-P-1001-01E

5

Remove sealing ring from pressure line (2)

Seal off refrigerant lines so that they cannot be penetrated by soiling and damp.

6

Remove underfloor paneling

AR61.30-P-1001RR

7

Remove nut (4) from pressure and intake lines at condenser

*BA83.30-P-1004-01E

8

Remove sealing ring from pressure line (2)

Seal off refrigerant lines so that they cannot be penetrated by soiling and damp.

9

Remove pressure line (2)

Install

10

Fit sealing ring to pressure line (2)

11

Position pressure line (2)

12

Unscrew nut (4) from pressure line (2) to condenser

Pay attention to sealing rings and position refrigerant lines accordingly.

*BA83.30-P-1004-01E

13

Install underbody paneling

AR61.30-P-1001RR

14

Position yoke plate at expansion valve (3) and secure with nut (4)

*BA83.30-P-1001-01E

Protect air conditioning circuit and components from moisture when carrying out repair work

AH83.30-N-0005-01A

15

Replace filter drier

Replace the fluid reservoir every time you open up the refrigeration circuit. When a receiver/dryer is left open, the dryer unit quickly becomes saturated with moisture, rendering it useless.

AR83.30-P-6525RR

16

Fill air conditioning system

AR83.30-P-1760RR

17

Perform air conditioning system function test

18

Read out fault memory

If necessary, eliminate faults in the control units.

Connect STAR DIAGNOSIS and read out fault memory

STAR DIAGNOSIS diagnosis system

AD00.00-P-2000-04RR

Air conditioning system

Number

Designation

Model 452.3/4

BA83.30-P-1001-01E

Nut on expansion valve

Nm

10

BA83.30-P-1004-01E

Lines at the condenser

Nm

10

Powiązane dokumenty