Correct oil level in air conditioning system if system is suddenly drained

AR83.30-P-5253C

15.12.09

MODEL 129
with CODE (580) Air conditioning (or Tempmatic for USA)
with CODE (581) Automatic air conditioning
A/C compressor 10PA17

	Perform work rapidly, compressor oil is hygroscopic. During evacuation of refrigerant, add to refrigerant circuit the compressor oil evacuated during recharge of air conditioning (new oil).
1	Replace defect part and fluid reservoir	on air conditioning system or USA Tempmatic code 580	ra83001290540x
		on air conditioning system code 581a	AR83.30-P-6520C
2	Add new compressor oil to prescribed oil quantity		*BF83.55-P-1002-01A
3	Switch on the air conditioner and allow the engine to idle for roughly 4 minutes.	 Set temperature selector wheel to blue notches or with automatic air conditioning set to "" Blowers to max.
4	Check air conditioning for proper operation	 The air outlet temperature at the center air vent should not drop below approx. + 5 0 C, if necessary  replace evaporator temperature sensor (B10/6)

 Refrigerant compressor

Number	Designation			Refrigerant compressor 10PA17, refrigerant R12 in model 129	Refrigerant compressor 10PA17, refrigerant R134a in model 129


BF83.55-P-1002-01A	Additional quantity of oil to be added when system suddenly looses fluid (e.g. line ruptured)	Compressor oil	cm3	40	40
		Specifications for Operating Fluids	Sheet	BB00.40-P-0362-00A	BB00.40-P-0362-00A