Remove/install fluid reservoir

AR83.30-D-6520F

Remove/install fluid reservoir

23.05.2013

MODEL

909

with CODE HH9 (Regulated air conditioning (Tempmatic))

1

Refrigerant line (expansion valve)

2

Fluid reservoir

3

Refrigerant line (condenser)

4

Screw clamp

6

Electrical connector

 Danger !

Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant.

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well-ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been drained.

AS83.00-Z-0001-01A



Procedure for a damaged or leaky air conditioning system

AH83.30-N-0004-01A



Protect air conditioning circuit and components from moisture when carrying out repair work

AH83.30-N-0005-01A



Notes on handling refrigerant R134a

AH83.30-N-0003-01A

 

Remove/install

1

Drain air conditioning system

AR83.30-D-1760FB

 Installation: Evacuate air conditioning system, refill it and check it for proper operation and leaktightness.

2

Disconnect electrical connector (6)

3

Detach refrigerant lines (1, 3) on fluid reservoir (2)

 Screw/bolt, refrigerant line on fluid reservoir

*BA83.30-N-1010-02A

4

Loosen screw clamp (4)

5

Remove fluid reservoir (2)

6

Install in the reverse order

 Refrigerant lines

Number

Designation

MODEL 909
with CODE HH9 (Regulated air conditioning (Tempmatic))

BA83.30-N-1010-02A

Screw/bolt, refrigerant line on fluid reservoir

Nm

7,8 (1)