ar8310p2010q

Remove/install actuator motor for left vent flap

Typ ar · temat 83.10 · wersja 0201 · 2006-07-26

Dotyczy: MODEL 209.3 with CODE (581) Convenience automatic air conditioning

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.10 Wentylacja — Seria 209 (modele 3**)

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.15 Klimatyzacja › 39.15.30 Silnik dmuchawy/ siłownik — Seria 209 (modele 3**)

AR83.10-P-2010Q

Remove/install actuator motor for left vent flap

22.8.01

MODEL 209.3 with CODE (581) Convenience automatic air conditioning

Remove/install actuator motor for left vent flap

P83.10-2431-09

1 Ignition lock control cable

1b Locating tab

1c Clutch

M2/19 Left fresh air flap positioning motor

N15/5 Electronic selector lever module control unit

2 Electrical line

3 Vapor barrier

4 Bolts

5 Electrical connector

Modification notes

18.2.04

Disconnect/connect/remove ground lead from battery

Remove/Install

1.1

Remove operating / display unit with control unit

up to 31.5.04

with COMAND operating and display system code 352, with Japan version code 498

AR82.85-P-7472Q

as of 1.6.04

with Japan version code 498, with COMAND APS (with navigation) code 527, with COMAND APS USA (with navigation) code 530

AR82.85-P-7472QA

1.2

Remove radio

up to 31.5.04,

up to 31.5.04 with MB Audio 10 CD radio with VK/RDS code 756

AR82.60-P-7502Q

as of 1.6.04

AR82.60-P-7502QA

Up to 31.5.04 with Audio 30 APS code 353

AR82.61-P-7412P

As of 1.6.04 with Audio 50 APS MB radio code 525

AR82.61-P-7412QA

2.1

Remove stowage compartment below radio

With MB Audio 10 CC radio with VK/RDS,

with MB Audio 10 CD radio with VK/RDS, code 756

3

Remove lower section of instrument panel on driver side

AR68.10-P-1505Q

4.1

Remove ignition switch cable (1) from the electronic selector lever module control unit (N15/5)

On vehicles with transmission 722

Press locking tab (1b) together and push coupling (1c) against the spring force into the electronic selector lever module control unit (N15/5), twist through approx. 90° (right or left) and pull off ignition lock control cable (1) (arrow).

5

Push damping (3) up

Expose ignition lock control cable (1) and electrical line (2) at comfort AAC control and operating unit (3-pin electrical connector).

6

Remove bolts (4)

7

Remove vent flap actuator motor left (M2/19)

8

Disconnect electrical connector (5)

9

Install in the reverse order

10

Connect STAR DIAGNOSIS, normalize left fresh air flap actuator (M2/19), read out and erase fault memory

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

STAR DIAGNOSIS diagnosis system

*WH58.30-Z-1048-13A

11

Perform function check

Commercially available tools

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00

Powiązane dokumenty