ar8285s0010e

Remove/install Global System for Mobile Communications (GSM) antenna

Typ ar · temat 82.85 · wersja 0100 · 2014-03-04

Dotyczy: MODEL 447.8 with CODE EH4 (Comfort telephony)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.85 Systemy nawigacyjne i komunikacyjne — Seria 447 (modele 8**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.80 Antena/ wzmacniacz anteny › 31.80.14 Nadajnik/ odbiornik — Seria 447 (modele 8**)

AR82.85-S-0010E

Remove/install Global System for Mobile Communications (GSM) antenna

03.02.2014

MODEL

447.8

with CODE EH4 (Comfort telephony)

Remove/install Global System for Mobile Communications (GSM) antenna

S82.85-4524-09

1

Outside mirror trim

4

Plug housing

7

Electrical line

2

Cover

5

Lock

8

Global System Mobile (GSM) antenna

3

Insulation

6

Connector

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and remove transmitter key

2

Remove right outside mirror

AR88.70-S-9000E

3

Remove trim panel of outside mirror (1)

AR88.70-S-9040E

4

Remove cover (2) on outside mirror

Installation: Observe installation position for cover (2).

5

Remove insulation (3)

6

Remove connector housing (4) at electrical line (7) of GSM antenna (8)

To do so, release lock (5) as shown and pull out plug (6) in direction of arrow.

7

Remove electrical line (7) of GSM antenna (8) at mount of outside mirror


When pulling out, ensure unobstructed movement of electrical line (7) in the opening (arrow A).
Otherwise damage to the electrical line (7) may occur.

8

Release GSM antenna (8) in area of catches (arrows B) from carrier plate

9

Detach electrical line (7) at housing of outside mirror and remove with GSM antenna (8)

Installation: Make sure that electrical line (7) is routed correctly at housing of outside mirror.

10

Install in the reverse order

Powiązane dokumenty