ar8285s0002e

Remove/install global positioning system (GPS) antenna

Typ ar · temat 82.85 · wersja 0102 · 2016-02-11

Dotyczy: Model 447.6/7 with code E1N (Becker MAP PILOT) Model 447.6/7 with code EV6 (Pre-installation Becker MAP PILOT) Model 447.8, 448.8 with code EA2 (COMAND Online with 6-disc DVD changer) Model 447.8 with code EG9 (Garmin MAP PILOT) Model 447.8 with code EJ9 (COMAND Online) Model 447.8 with code EV5 (Pre-installation for Garmin MAP PILOT)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.85 Systemy nawigacyjne i komunikacyjne — Seria 447 (modele 6**, 7**, 8**) · Seria 448 (modele 8**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.80 Antena/ wzmacniacz anteny › 31.80.14 Nadajnik/ odbiornik — Seria 447 (modele 6**, 7**, 8**) · Seria 448 (modele 8**)

AR82.85-S-0002E

Remove/install global positioning system (GPS) antenna

27.01.2016

Model

447.6/7

with code E1N (Becker MAP PILOT)

Model

447.6/7

with code EV6 (Pre-installation Becker MAP PILOT)

Model

447.8, 448.8

with code EA2 (COMAND Online with 6-disc DVD changer)

Model

447.8

with code EG9 (Garmin MAP PILOT)

Model

447.8

with code EJ9 (COMAND Online)

Model

447.8

with code EV5 (Pre-installation for Garmin MAP PILOT)

Remove/install global positioning system (GPS) antenna

Shown with code E65 (Burmester surround sound system)

1

Electrical wiring harness

A2/47

GPS antenna

S82.85-4525-06

Remove/install global positioning system (GPS) antenna

S82.85-4526-09

Shown on MODEL 447.8 with CODE EJ9 (COMAND Online)

1

Electrical wiring harness

3

Right center air vent

A40/8

Audio/COMAND display control unit

2

Bracket

4

Electrical connector

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove cover for loudspeaker

AR68.10-S-1050E

2

Remove taxi two-way radio speaker in center of instrument panel

Model 447.8 with code ZK2 (Taxi version with emergency alarm system) or with code ZK3 (Taxi version without emergency alarm system)

3

Detach GPS antenna (A2/47) from instrument panel

4

Unhook electrical wiring harness (1) at opening (arrow A)

5.1

Remove Audio/COMAND display control unit (A40/8)

Model 447.8, 448.8
with code EA2 (COMAND Online with 6-disc DVD changer)
Model 447.8
with code EG9 (Garmin MAP PILOT)
Model 447.8
with code EJ9 (COMAND Online)
Model 447.8
with code EV5 (Pre-installation for Garmin MAP PILOT)

AR82.60-S-7722E

5.2

Remove radio

Model 447.6/7
with code E1N (Becker MAP PILOT)
with code EN7 (Audio 15)
Model 447.6/7
with code EN7 (Audio 15)
with code EV6 (Pre-installation Becker MAP PILOT)

AR82.60-S-7502E

6

Detach bracket (2) of electrical wiring harness (1) under instrument panel using a suitable tool


Handle tool carefully.
Otherwise, damage to the instrument panel can occur.

Installation: Ensure that the bracket (2) is seated correctly.

7

Remove right center air vent (3)


Model 447.8, 448.8

AR83.10-S-4503E

8

Disconnect electrical connector (4) and lead electrical wiring harness (1) out of instrument panel

Installation: Use suitable pull-in aid.

9

Remove GPS antenna (A2/47)

If the adhesive pad at the GPS antenna (A2/47) is damaged during removal.

Replace GPS antenna (A2/47)

10

Install in the reverse order

Powiązane dokumenty