ar8270p8951txa

Remove/install antenna

Typ ar · temat 82.70 · wersja 0105 · 2010-03-26

Dotyczy: MODEL 219.3 up to 31.5.06 with CODE (228) Stationary heater with CODE (272) Telephone preinstallation (non-networked) incl. telephone antenna with CODE (386) Preinstallation for telephone "Handy", UPCI system with CODE (388) Telephone "Handy", UPCI system

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.70 Telefon, system obsługi telefonu (SBS) — Seria 219 (modele 3**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.80 Antena/ wzmacniacz anteny › 31.80.14 Nadajnik/ odbiornik — Seria 219 (modele 3**)

AR82.70-P-8951TXA

Remove/install antenna

17.3.10

MODEL 219.3 up to 31.5.06
with CODE (228) Stationary heater
with CODE (272) Telephone preinstallation (non-networked) incl. telephone antenna
with CODE (386) Preinstallation for telephone "Handy", UPCI system
with CODE (388) Telephone "Handy", UPCI system

Remove/install antenna

P82.70-5381-09

Shown on vehicle without code 228 Stationary heater

1 Right cover

2 Telephone antenna line

A2/49a1x1 Telephone antenna connector

W7 Ground (right wheel well in luggage compartment)

3 Right grommet

7 Ground cable

8 Self-adhesive felt

A2/49 Roof antenna

Remove/install

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Remove right side paneling in trunk

AR68.30-P-4800TX

2

Disconnect telephone antenna connector (A2/49a1x1)

3

Undo nut on ground of right luggage compartment wheel well (W7) and remove ground line (7)

4

Remove trim panel (1) on the right

5

Remove telephone antenna line (2) with right grommet (3) out of the right cable duct

Note installation of lines in luggage compartment.

Installation: Coat right grommet (3) with soapy water. Attach telephone antenna line (2) using self-adhesive felt (8) in area of trunk lid hinge.

6

Pull telephone antenna line (2) out of seal of heated rear window

Installation: Insert telephone antenna line (2) into seal of heated rear window using a suitable feeler gauge.

*129589032100

7

Separate roof antenna (A2/49) from heated rear window using mounting wedge and remove

Installation: Glue on roof antenna (A2/49).

AR82.70-P-8951-01TX

*110589035900

Glass primer

*BR00.45-Z-1023-02A

Adhesive foil for roof antenna on rear window (when installing old roof antenna (A2/49))

*BR00.45-Z-1079-02A

8

Remove adhesive residue from heated rear window

Cleaner

*BR00.45-Z-1025-04A

9

Install in the reverse order

Remove/install antenna
Remove/install antenna

129 589 03 21 00

Feeler gauge

Mounting wedge

110 589 03 59 00

Repair materials

Number

Designation

Order number

BR00.45-Z-1023-02A

Glass primer

A 006 989 39 71

BR00.45-Z-1079-02A

Adhesive foil

A 211 817 00 21

BR00.45-Z-1025-04A

Cleaner

A 005 989 19 71

Powiązane dokumenty