ar8262p8300rg

Remove/install antenna amplifier module

Typ ar · temat 82.62 · wersja 0102 · 2019-07-24

Dotyczy: Model 190

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.62 Głośnik, wzmacniacz, antena — Seria 190

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.80 Antena/ wzmacniacz anteny › 31.80.14 Nadajnik/ odbiornik — Seria 190

AR82.62-P-8300RG

Remove/install antenna amplifier module

10.07.2019

Model

190

Remove/install antenna amplifier module

P82.62-4276-08

Shown on model 190 as of model year 2019

1

Front headliner

A2/18

FM 1, AM, CL [ZV] and KEYLESS GO antenna amplifier

2

Electrical connectors

A2/19

FM 2 and DAB band III antenna amplifier

3

Screw

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

2

Remove front roof lining (1).


Model 190.3

AR68.30-P-7607RG

Model 190.4

AR68.30-P-7607RGR

3

Release electrical connectors (2) and disconnect from FM 1, AM, CL and KEYLESS-GO antenna amplifier (A2/18).

4

Release electrical connectors (2) and disconnect from FM 2 and DAB band III antenna amplifier (A2/19).

Model 190
as of model year 2019

5

Remove bolt (3) .

6

Unclip FM 1, AM, CL and KEYLESS-GO antenna amplifier (A2/18) on front passenger side and remove.

7

Unclip FM 2 and DAB band III antenna amplifier (A2/19) on driver's side and remove.

Model 190
as of model year 2019

8

Install in the reverse order.

Powiązane dokumenty