ar8262p8300h

Remove/install antenna amplifier module

Typ ar · temat 82.62 · wersja 0105 · 2019-03-18

Dotyczy: Model 240 Antenna amplifier modules to rear window

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.62 Głośnik, wzmacniacz, antena — Seria 240

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.80 Antena/ wzmacniacz anteny › 31.80.14 Nadajnik/ odbiornik — Seria 240

AR82.62-P-8300H

Remove/install antenna amplifier module

08.03.2019

Model

240

Antenna amplifier modules to rear window

Remove/install antenna amplifier module

Shown on model 240.078

1

Electrical connectors

2

Roof wiring harness

3

Nuts

4

Electrical connectors

5

Electrical connectors

6

Nut

A2/71

Amplifier module 1, window antenna

A2/72

Amplifier module 2, window antenna

P82.62-2527-06

Remove/install

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Disconnect battery ground line

AR54.10-P-0003H

2

Remove rear headliner


Model 240.0

AR68.30-P-7608H

Model 240.1 with code 418 (Glass tilting/sliding roof in rear passenger compartment) except code 413 (Panoramic roof with solar module)

AR68.30-P-7608HA

Model 240.1 with code 413 (Panoramic roof with solar module) except code 215 (Partition) except code 302 (Partition with clear glass) except code 303 (Partition with clear glass and curtain) except code 418 (Glass tilting/sliding roof in rear passenger compartment)

AR68.30-P-7608HB

Detach rear roof lining only far enough until window antenna amplifier module 1 (A2/71) or window antenna amplifier module 2 (A2/72) is accessible.

3.1

Unclip roof wiring harness (2) in area of window antenna amplifier module 1 (A2/71) until electrical connectors (4, 5) and nuts (6) are accessible

Only when removing window antenna amplifier module 1 (A2/71).

3.2

Unclip roof wiring harness (2) in area of window antenna amplifier module 2 (A2/72) until electrical connectors (1) and nuts (3) are accessible

Only when removing window antenna amplifier module 2 (A2/72).

4.1

Disconnect electrical connectors (4, 5) from window antenna amplifier module 1 (A2/71)

Only when removing window antenna amplifier module 1 (A2/71).

4.2

Disconnect electrical connectors (1) from window antenna amplifier module 2 (A2/72)

Only when removing window antenna amplifier module 2 (A2/72).

5.1

Remove nuts (6)

Only when removing window antenna amplifier module 1 (A2/71).

5.2

Unscrew nuts (3)

Only when removing window antenna amplifier module 2 (A2/72).

6

Fold window antenna amplifier module 1 (A2/71) or window antenna amplifier module 2 (A2/72) forward and remove from respective stud bolts

7

Install in the reverse order

Powiązane dokumenty