ar8262p8000ra

Removing and installing keyless go antenna

Typ ar · temat 82.62 · wersja 0103 · 2006-01-18

Dotyczy: MODEL 230.4 up to 28.2.06 with CODE (889) Keyless Go In trunk

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.62 Głośnik, wzmacniacz, antena — Seria 230 (modele 4**)

EinPAS 29 System uprawniający do jazdy/zabezpieczający › 29.15 KEYLESS-GO › 29.15.14 Nadajnik/odbiornik — Seria 230 (modele 4**)

AR82.62-P-8000RA

Removing and installing keyless go antenna

23.12.05

MODEL 230.4 up to 28.2.06 with CODE (889) Keyless Go
In trunk

Removing and installing keyless go antenna

P82.62-2255-06

1 Battery support

A2/35 Left luggage compartment Keyless Go antenna

A2/36 Right luggage compartment Keyless Go antenna

N69/5 Keyless Go control unit

Remove/install

1

Switch off the ignition and remove the transmitter key from the EIS control unit

Press Keyless Go start/stop button repeatedly until ignition is switched off.

Remove the Keyless Go transmitter card or transmitter key from the vehicle and store beyond the reach of the transmitter

(min. 2 m).

2.1

Remove left side paneling in trunk

When removing left luggage compartment Keyless Go antenna (A2/35).

AR68.30-P-4800R

2.2

Remove left and right side paneling in trunk

When removing right luggage compartment Keyless Go antenna (A2/36).

AR68.30-P-4800R

3.1

Remove battery support (1)

When removing right luggage compartment Keyless Go antenna (A2/36).

4

Detach left luggage compartment Keyless Go antenna (A2/35) or right luggage compartment Keyless Go antenna (A2/36) and expose antenna line

5

Disconnect electrical connector for left luggage compartment Keyless Go antenna (A2/35) or right luggage compartment Keyless Go antenna (A2/36) from Keyless Go control unit (N69/5)

6

Install in the reverse order

Powiązane dokumenty