ar8262p0010frx

Remove/install antenna changeover switch

Typ ar · temat 82.62 · wersja 0100 · 2019-02-14

Dotyczy: Model 290 with code 380 (Car telephony package) with code 899 (Multifunction telephony)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.62 Głośnik, wzmacniacz, antena — Seria 290

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.80 Antena/ wzmacniacz anteny › 31.80.14 Nadajnik/ odbiornik — Seria 290

AR82.62-P-0010FRX

Remove/install antenna changeover switch

25.06.2018

Model

290

with code 380 (Car telephony package)

with code 899 (Multifunction telephony)

Remove/install antenna changeover switch

Shown with code 550 (Trailer hitch) and with code U67 (230 volt socket in vehicle interior)

1

Bracket

A2/168

Telephone antenna changeover switch

P82.70-7968-06

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

Remove/install

1

Remove side trim in right load compartment.

AR68.30-P-1185FRX

2

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

3

Remove holder (1) and set aside with control units attached.

4

Disconnect electrical connectors from telephone antenna changeover switch (A2/168).

5

Unclip telephone antenna changeover switch (A2/168) and remove.

6

Install in the reverse order.

Powiązane dokumenty