ar8225d0002ts

Remove/install additional turn signal module

Typ ar · temat 82.25 · wersja 0100 · 2019-01-09

Dotyczy: Model 907.1/2 Model 910.1

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.25 Sygnalizacja/układ alarmowy — Seria 907 (modele 1**, 2**) · Seria 910 (modele 1**)

EinPAS 30 Instalacja oświetleniowa › 30.15 Oświetlenie zewnętrzne › 30.15.11 Moduł sterujący/ przekaźnik — Seria 907 (modele 1**, 2**) · Seria 910 (modele 1**)

AR82.25-D-0002TS

Remove/install additional turn signal module

20.12.2018

Model

907.1/2

Model

910.1

Remove/install additional turn signal module

D54.15-1198-79

Shown on model 907.1 with code SB1 (Comfort driver's seat)

1

Additional turn signal module

4

Relay holder

2

Catch hook

5

Seat frame

3

Electrical connector

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1.1

Set driver's seat to the foremost and uppermost position.

Model 907.1/2, 910.1
except code SB3 (Suspension seat, comfort version, driver's seat)
except code SR8 (Swivel base for driver' seat)

1.2

Remove turn plate with mounted driver's seat.

Model 907.1/2, 910.1
with code SR8 (Swivel base for driver' seat)

AR91.10-D-1456TS

Do not remove driver's seat from turn plate.

1.3

Remove driver seat.

Model 907.1/2, 910.1
with code SB3 (Suspension seat, comfort version, driver's seat)

AR91.10-D-1000TS

2

Loosen seat base cover and remove from working area.

3

Remove relay holder (4) from seat base (5) and remove from working area with connected electric lines.

If required.

The position of the relay holder (4) on the seat base (5) may vary, depending on the vehicle equipment involved.

4

Disconnect electrical connector (3).

5

Release additional flasher module (1) at catch hook (2) and remove upwards.

6

Install in the reverse order

Check

7

Perform function test of turn signal system.

Powiązane dokumenty