Remove/install additional turn signal module

AR82.25-D-0002TS

Remove/install additional turn signal module

20.12.2018

Model

907.1/2

Model

910.1

Shown on model 907.1 with code SB1 (Comfort driver's seat)

1

Additional turn signal module

4

Relay holder

2

Catch hook

5

Seat frame

3

Electrical connector

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1.1

Set driver's seat to the foremost and uppermost position.

Model 907.1/2, 910.1
except code SB3 (Suspension seat, comfort version, driver's seat)
except code SR8 (Swivel base for driver' seat)

1.2

Remove turn plate with mounted driver's seat.

Model 907.1/2, 910.1
with code SR8 (Swivel base for driver' seat)

AR91.10-D-1456TS

 Do not remove driver's seat from turn plate.

1.3

Remove driver seat.

Model 907.1/2, 910.1
with code SB3 (Suspension seat, comfort version, driver's seat)

AR91.10-D-1000TS

2

Loosen seat base cover and remove from working area.

3

Remove relay holder (4) from seat base (5) and remove from working area with connected electric lines.

If required.

 The position of the relay holder (4) on the seat base (5) may vary, depending on the vehicle equipment involved.

4

Disconnect electrical connector (3).

5

Release additional flasher module (1) at catch hook (2) and remove upwards.

6

Install in the reverse order



Check

7

Perform function test of turn signal system.