P82.10-A166-08
Shown on left front lamp unit (E1) of model 177 |
A | Bracket | C | Bracket | |
B | Bracket | E1 | Left front lamp unit |
1 | Repair bracket |
2 | Adjustment screw |
3 | Bolts |
P82.10-A167-11
| Remove | ||
1 | Remove front lamp unit (E1, E2). | ||
| Check | ||
2 | Check front lamp unit (E1, E2) for further signs of damage. | If there is a problem, | |
| |||
replace front lamp unit (E1, E2). | |||
3.1 | Cut back residue of damaged holder (A, B, C) until corresponding repair holder (1) can be fitted. | If a repair holder (1) has not yet been installed. | |
3.2 | Remove screws (3) of damaged repair holder (1) and remove respective repair holder (1). | If a repair holder (1) has already been installed. | |
4 | Clean and deburr repair area on front lamp unit (E1, E2). | ||
| Install | ||
5.1 | Align setting screw (2) of new repair holder (1) to match setting screw (2) of damaged holder (A, B, C). | If a repair holder (1) has not yet been installed. | |
5.2 | Align setting screw (2) of new repair holder (1) to match setting screw (2) of damaged holder (1). | If a repair holder (1) has already been installed. | |
6 | Position respective repair holder (1) on front lamp unit (E1, E2) and tighten screws (3) at designated holes. | ||
7 | Install front lamp unit (E1, E2). |