Remove/install front lamp unit

AR82.10-P-4733MFA

Remove/install front lamp unit

09.12.2019

Model

118, 177, 247

Shown on model 177.0

2

Bolts

E2

Right front lamp unit

E1

Left front lamp unit

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Note on damage to lamp unit

AH82.10-P-0002-00LW

 

Remove/install

1

Remove front bumper.

AR88.20-P-2000MFA

2

Remove screw/bolts (2) .

3

Release and disconnect electrical connector of front left lamp unit (E1) or front right lamp unit (E2).

4

Remove left front lamp unit (E1) or right front lamp unit (E2).

5

Remove front LED matrix lamp unit control unit.

If the left front lamp unit (E1) or the right front lamp unit (E2) is replaced.

Model 118, 177, 247
with code 640 (SAE dynamic LED headlamps, right-hand traffic)
Model 118, 177, 247
with code 641 (Dynamic LED headlamps, left-hand traffic)
Model 118, 177, 247
with code 642 (Dynamic LED headlamps, right-hand traffic)

AR82.10-P-2025MFA

6

Remove headlamp control unit.

When replacing the left front lamp unit (E1) or the right front lamp unit (E2).

Model 118, 177, 247
with code 631 (Static LED headlamps, left-hand traffic)
Model 118, 177, 247
with code 632 (Headlamps, LED, static, right-side traffic)
Model 177
with code 640 (SAE dynamic LED headlamps, right-hand traffic)
Model 177
with code 641 (Dynamic LED headlamps, left-hand traffic)
Model 177
with code 642 (Dynamic LED headlamps, right-hand traffic)

AR82.10-P-4660MFA

7

Install in the reverse order.

8

Perform commissioning of left front lamp unit (E1) or right front lamp unit (E2).

If the left front lamp unit (E1) or the right front lamp unit (E2) is replaced.



AD00.00-P-2000-06MFA

 Note matrix code on front lamp unit (E1, E2).



Check

9

Check headlamp adjustment and correct if necessary.



Model 118

AP82.10-P-8260Y



Model 247

AP82.10-P-8260AO



Model 177

AP82.10-P-8260N