Shown on ATA horn (H3) without protection bracket |
1 | Electrical connector |
2 | Theft protection nut |
H3 | ATA horn |
S80.50-4516-06
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Detach ground line of on-board electrical system battery | ||
2 | Remove lower engine compartment paneling | ||
3 | Disconnect electrical connector (1) from ATA signal horn (H3) | ||
Danger ! | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly flammable materials from the hazard area. Use air extraction system. | |
4 | Screw commercially available nut to threaded bolt on ATA horn (H3) and weld with two tack weld spots to theft-proof nut (2) | ||
5 | Unscrew commercially available nut with theft-proof nut (2) | Installation: Use new theft-proof nut (2). | |
Socket | |||
6 | Remove ATA horn (H3) | ||
7 | Remove protection bracket from new ATA signal horn (H3) | When replacing ATA horn (H3), if a protection bracket is not installed on the ATA horn (H3) to be replaced. | |
8 | Install in the reverse order | ||
| Check | ||
9 | Check ATA signal horn (H3) for proper function |
246 589 00 09 00
Socket
Powiązane dokumenty
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar5410s0003e
- ar5410s0003e
- ar6120s1105e
- ar6120s1105e
- as0000z000701a Zagrożenie dla życia przez wysokie napięcie przy spawaniu elektrycznym. Niebezpieczeństwo wybuchu podczas spawania w pobliżu materiałów łatwopalnych. Niebezpieczeństwo urazu na skutek odprysków przy spawaniu oraz promieniowania u