ar8050s0004e

Remove/install ATA engine hood switch

Typ ar · temat 80.50 · wersja 0102 · 2016-02-29

Dotyczy: Model 447 with code FY1 (Anti-Theft Protection package) Model 447 with code FZ5 (Anti-theft alarm system) Model 448.8 with code FZ5 (Anti-theft alarm system)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 80 Zamek centralny, sterowanie komfortowe, układ uprawniający do jazdy › 80.50 Układ ostrzegania przed włamaniem i kradzieżą (EDW), zabezpieczenie wnętrza pojazdu/zabezpieczenie przed odholowaniem — Seria 447 · Seria 448 (modele 8**)

EinPAS 29 System uprawniający do jazdy/zabezpieczający › 29.20 System zabezpieczający przed kradzieżą i włamaniem › 29.20.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 447 · Seria 448 (modele 8**)

AR80.50-S-0004E

Remove/install ATA engine hood switch

14.12.2015

Model

447

with code FY1 (Anti-Theft Protection package)

Model

447

with code FZ5 (Anti-theft alarm system)

Model

448.8

with code FZ5 (Anti-theft alarm system)

Remove/install ATA engine hood switch

Shown on model 447.8

4

Mounting clip

5

Cover

S80.50-4527-05

Remove/install ATA engine hood switch

S80.50-4515-08

1

Engine hood catch

3

Electrical connector

2

Cover

S62/41

Engine hood switch

Remove/install

1

Open engine hood

2

Remove retaining clips (4) and remove cover (5)

Installation: Check retaining clips (4).

If retaining clips (4) are damaged

Replace corresponding retaining clip (4).

3

Disconnect electrical connection (3)

4

Lift catch hooks (arrows A) on cover (2) with suitable screwdriver and unclip cover (2) with engine hood switch (S62/41) in direction of arrow

Installation: Ensure that hook (arrow B) and catch hooks (arrows A) are seated correctly on engine hood lock (1).

5

Install in the reverse order

Check

6

Close engine hood lock (1) with suitable tool when engine hood is open and lock vehicle with remote control

The anti-theft alarm system (ATA) is activated after approx. 10 seconds.

7

Open engine hood lock (1) with suitable tool

This should trigger the alarm.
The alarm can be switched off with the transmitter key when opening the vehicle.