AR80.50-P-9840C | Removing and installing ATA alarm signal siren | 24.3.98 |
MODEL 129 as of 1.6.98 with CODE (551a) Anti-theft alarm (ATA)
P80.50-2021-11
1 Pop rivet
2 Electrical connection
3 Holder
H3/1 Alarm signal siren
| Removal, installation | ||
1 | Remove right inner fender | ||
2 | Drill out or cut out pop rivets (1) | To drill out: Use 7 mm dia. bit Drill with slightly circular motion until rivet head falls off, do not drill through sheet metal | |
To cut off: Use spherical cutter | |||
| |||
3 | Disconnect connector (2) from alarm signal siren (H3/1) | Before disconnecting the siren, ensure that the anti-theft alarm (ATA) is deactivated because otherwise the siren is activated. (Rechargeable battery for internal power supply) | |
4 | Remove mount (3) from alarm siren signal (H3/1) | ||
5 | Install in opposite order |
Commercially available tools