Remove/install bellows for pop-up roof

AR77.70-S-0080E

Remove/install bellows for pop-up roof

07.02.2018

Model

447.7/8

with code ZK9 (Lifting roof hatch)

Model

447.8

with code ZK0 (EASY UP pop-up roof, electric)

Modification notes

29.01.2018

Method revised

Operation steps 1 to 6

Shown on model 447.8 with code ZK0 (pop-up roof EASY UP, electric) with installed pop-up roof

1

Bellows

5

Inner filler channel

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A



Remove

1

Remove pop-up roof

Model 447.7/8
with code ZK9 (Lifting roof hatch)

AR77.70-S-0001E

Model 447.8
with code ZK0 (EASY UP pop-up roof, electric)

AR77.75-S-0011E

2

Remove inner profile channel (5)


Carefully remove inner profile channel (5).
Otherwise, the boot (1) may be damaged.

3

Remove bellows (1)



Install

4

Align boot (1) with pop-up roof and lay down

5

Install bellows (1) on pop-up roof

AR77.70-S-0080-01E

Special lubricant, spray

*BR00.45-Z-1077-06A

 Long wedge

*115589035900

 Roller

*639589086300

6

Install corresponding pop-up roof

Model 447.7/8
with code ZK9 (Lifting roof hatch)

AR77.70-S-0001E

Model 447.8
with code ZK0 (EASY UP pop-up roof, electric)

AR77.75-S-0011E

Repair materials

Number

Designation

Order number

BR00.45-Z-1077-06A

Special lubricant, spray

A 000 989 35 60