AR77.20-P-3010TX | Remove/install tilting/sliding roof motor | 13.8.04 |
MODEL 219.3 with CODE (414) Glass electric tilting/sliding roof
P77.20-2494-08
1 Apex seal
2 Bolts
3 Mirror support
M12m1 SR [SHD] motor
4 Headliner
5 Bolts
| Remove/Install | ||
1 | Open tilting/sliding roof approx. 20 cm | ||
2 | Remove overhead control panel control unit | ||
3 | Remove left and right sun visor | ||
4 | Remove both front grab handles from roof | ||
5 | Unclip apex seal (1) upward and remove | ||
6 | Unscrew bolts (2) and remove mirror support (3) | ||
7 | Pull headliner (2) down in front area until SR motor (M12m1) is accessible | Carefully pull down headliner (4) Danger of damaging headliner (4). | |
8 | Unscrew bolts (5) and remove SR motor (M12m1) | | |
9 | Install in the reverse order |
Sliding roof - Electrics