AR77.20-P-2500TX | Remove/install wind deflector | 12.8.04 |
MODEL 219.3 with CODE (414) Glass electric tilting/sliding roof
P77.20-2495-09
1 Wind deflector
2 Sealing rail
5 Safety hook
6 Mounting wedge
3 Spring bracket
4 Height stop
| Remove/Install | ||
Danger! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Open tilting/sliding roof | ||
2 | Unclip sealing rail (2) with suitable screwdriver | ||
3 | Lightly press wind deflector (1) downward to one side until height stop (4) is exposed | ||
4 | Press wind deflector (1) off toward center of vehicle on one side with mounting wedge (6) | Carefully press off wind deflector (1)Otherwise safety hook (5) can break off | |
| |||
5 | Slightly lift wind deflector (1) upward, unhook on opposite side and remove | Installation: Check whether left and right spring bracket (3) is seated correctly | |
6 | Install in the reverse order | ||
7 | Perform teach-in run for tilting/sliding roof obstruction sensor | ||
| Connect STAR DIAGNOSIS and read out fault memory | ||
Diagnosis system STAR DIAGNOSIS |
Mounting wedge
110 589 03 59 00
Commercially available tools
Powiązane dokumenty
- ad0000p200004a Podłączanie STAR DIAGNOSIS, odczytywanie pamięci usterek
- ad0000p200004a
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.