ar7720p1000tx

Remove/install tilting/sliding roof cover

Typ ar · temat 77.20 · wersja 0100 · 2006-07-26

Dotyczy: MODEL 219.3 with CODE (414) Glass electric tilting/sliding roof

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 77 Okno dachowe, dach składany, nasadki › 77.20 Okno dachowe przesuwane elektrycznie — Seria 219 (modele 3**)

EinPAS 38 System dachu › 38.15 Okno dachowe przesuwne/ panoramiczne okno dachowe przesuwne › 38.15.33 Poszycie/pokrywa okna dachowego — Seria 219 (modele 3**)

AR77.20-P-1000TX

Remove/install tilting/sliding roof cover

12.8.04

MODEL 219.3 with CODE (414) Glass electric tilting/sliding roof

Remove/install tilting/sliding roof cover

P77.20-2505-07

Shown on left side of tilting/sliding roof

1 Tilting/sliding roof cover

2 Sliding roof lining

5 Bolts

6 Mounting wedge

3 Covering

4 Rubber bellows

Remove/Install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Completely open sliding roof lining (2)

2

Open tilting/sliding roof cover (1) approx. 20 cm

3

Unclip cover (3) in center and at side with mounting wedge (6), move covering (3) out of rubber bellows (4) and remove

*110589035900

Installation: Left and right catch hooks on covering (3) should arrest in rubber bellows (4).

4

Move tilting/sliding roof cover (1) to pop-up position

5

Remove left and right rubber bellows (4) from tilting/sliding roof cover (1)

Carefully pull rubber bellows (4) up and down to prevent damage

Observe installation position of rubber bellows (4)

6

Unscrew bolts (5) on left and right mount on tilting/sliding roof cover (1)

Installation: Adjust tilting/sliding roof cover (1).

Refer to:

Align tilting/sliding roof cover.

AR77.20-P-1100TX

7

Remove tilting/sliding roof cover (1)

Carefully remove tilting/sliding roof cover (1). Danger of damaging paint on vehicle roof.

8

Install in the reverse order

9

Perform teach-in run for tilting/sliding roof obstruction sensor.

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Diagnosis system STAR DIAGNOSIS

*WH58.30-Z-1048-13A

Remove/install tilting/sliding roof cover

Mounting wedge

110 589 03 59 00

Commercially available tools

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00

Powiązane dokumenty