Remove, install electric sliding door drive unit

AR72.29-S-8788E

Remove, install electric sliding door drive unit

25.11.2015

Model

447.7/8, 448.8

with code T55 (Electric operation of sliding door on right)

Model

447.7/8, 448.8

with code T56 (Electric operation of sliding door on left)

1

Bolts

4

Nut

M73/1

Right electric sliding door drive

2

Bracket

5

Electrical connector

M73/2

Left electric sliding door drive

3

Bolts

6

Cables

 Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove rear passenger compartment side trim panel

Model 447.7
with code T55 (Electric operation of sliding door on right)
with code V23 (Interior panelling higher execution)
Model 447.7
with code T56 (Electric operation of sliding door on left)
with code V23 (Interior panelling higher execution)
Model 447.8
with code T55 (Electric operation of sliding door on right)
except code ZK7 (Equipment line MARCO POLO)
Model 447.8
with code T56 (Electric operation of sliding door on left)
except code ZK7 (Equipment line MARCO POLO)
Model 448.8
with code T55 (Electric operation of sliding door on right)
Model 448.8
with code T56 (Electric operation of sliding door on left)

AR68.30-S-1206E

Model 447.8
with code T55 (Electric operation of sliding door on right)
with code ZK7 (Equipment line MARCO POLO)

AR68.30-S-1207E

2

Remove sliding door center carriage

AR72.16-S-2230E

3

Unscrew bolts (1) and lay bracket (2) with speaker down to side

Model 447.7/8
with code EL9 (Two-way loudspeaker system in front and rear)
with code T55 (Electric operation of sliding door on right)
Model 447.7/8
with code EL9 (Two-way loudspeaker system in front and rear)
with code T56 (Electric operation of sliding door on left)
Model 447.8
with code E65 (Burmester surround sound system)
with code T55 (Electric operation of sliding door on right)
Model 447.8
with code E65 (Burmester surround sound system)
with code T56 (Electric operation of sliding door on left)
Model 448.8
with code E65 (Burmester surround sound system)
with code T55 (Electric operation of sliding door on right)
Model 448.8
with code E65 (Burmester surround sound system)
with code T56 (Electric operation of sliding door on left)
Model 448.8
with code EL9 (Two-way loudspeaker system in front and rear)
with code T55 (Electric operation of sliding door on right)
Model 448.8
with code EL9 (Two-way loudspeaker system in front and rear)
with code T56 (Electric operation of sliding door on left)

4

Remove bolts (3)

 Screw/bolt, drive unit to sidewall

*BA72.16-N-1018-01J

5

Unscrew nut (4)

 Nut, drive unit to sidewall

*BA72.16-N-1017-01J

6

Disconnect electrical connection (5)

7

Remove right electrical sliding door drive (M73/1) or left electrical sliding door drive (M73/2) ad guide cables (6) through opening in side wall


Helper required.
Otherwise the pant can be damaged by the cables (6).

 Installation: Ensure that cables (6) and seal are routed and seated correctly.

8

Install in the reverse order



Check

9

Check electric sliding door proper function

 Sliding doors

Number

Designation

Model 447, 448

BA72.16-N-1017-01J

Nut, drive unit to sidewall

Nm

6

 Sliding doors

Number

Designation

Model 447, 448

BA72.16-N-1018-01J

Screw/bolt, drive unit to sidewall

Nm

6