ar7216s2230e

Remove/install sliding door center carriage

Typ ar · temat 72.16 · wersja 0101 · 2016-03-03

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.16 Drzwi przesuwane — Seria 447 · Seria 448

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.44 Drzwi przesuwne — Seria 447 · Seria 448

AR72.16-S-2230E

Remove/install sliding door center carriage

21.12.2015

Model

447, 448

Remove/install sliding door center carriage

Shown on model 447.8 with code T55 (Electrical actuation for right sliding door)

1

Screw

2

Ball head

3

Carriage

4

Sliding door

S72.16-4612-06

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1.1

Remove fuse 74 on left electric sliding door (4)

Model 447.7/8, 448
with code T56 (Electric operation of sliding door on left)

Assignment of right footwell firewall fuse and relay module

GF54.15-S-1256-39TRA

1.2

Remove fuse 311 on right electric sliding door (4)

Model 447.7/8, 448
with code T55 (Electric operation of sliding door on right)

Assignment of fuse and relay module, right A-pillar

GF54.15-S-1256-38TRA

2

Remove left and right taillamp

AR82.10-S-4905E

3

Remove center guide rail paneling for sliding door (4)

AR72.16-S-1260-01E

4

Remove transfer roller housing


Model 447.7/8, 448.8
with code T55 (Electric operation of sliding door on right)
Model 447.7/8, 448.8
with code T56 (Electric operation of sliding door on left)

AR72.16-S-7820E

5

Remove bolts (1)


Secure sliding door (4) against falling down.
Otherwise the sliding door (4) can be damaged.

Installation: Tighten bolts (1) with torque only after adjusting sliding door (4).

6

Remove sliding carriage (3) in direction of arrow


Carefully remove sliding carriage (3).
Otherwise the paint can be damaged.

7

Remove ball heads (2) from sliding carriage (3)

Model 447.7/8, 448.8
with code T55 (Electric operation of sliding door on right)
Model 447.7/8, 448.8
with code T56 (Electric operation of sliding door on left)


Carefully remove ball heads (2) from sliding carriage (3).
Otherwise the paint can be damaged.

8

Install in the reverse order

Adjust

9

Adjust sliding door (4)

AR72.16-S-1023E

Check

10

Check sliding door (4) for proper function

Powiązane dokumenty