Revisions
S72.20-2500-09
1 Hinge on tailgate panel
2 Central locking connector
4 Shock absorber
3 Rear window washer connector
| Removal, installation | ||
1 | Remove door liner on tailgate | ||
2 | Unclip window frame trim | First outer trim then top trim | |
3 | Pull washing water hose off of rear wiper motor | Plug hose with suitable plug | |
4 | Remove cover on license plate lamp | Two screws each on inside and outside | |
5 | Disconnect connector from rear window defroster | ||
6 | Disconnect connector (2) from central locking | Only with code FZ0 or FZ1 | |
7 | Disconnect connector (3) from rear window washer | ||
8 | Pull electrical leads out of tailgate | ||
9 | Unclip shock absorber (4) on tailgate | Have 2nd person hold tailgate to prevent falling down | |
10 | Mark installation position of tailgate | This facilitates reinstallation | |
11 | Unscrew hinges (1) on tailgate | Remove tailgate with help | |
| |||
12 | Reinstall in opposite order | After installing check gap all around, | |
Adjust tailgate |
Tailgate