Remove/install rear-end door

AR72.20-P-3500SO

19.10.06

MODEL 450.3
Rear-end door lower section

P72.20-2250-09

1 Rear-end door

2 Damping material

3 Acoustic matting

7 Door check strap with locking wedge

8 Nut

4 Electrical connector

5 Electrical connector

6 Bolt

 	Remove/install
1	Remove rear-end door paneling		AR72.20-P-1000SM
2	Remove damping (2) at rear-end door
3.1	Remove acoustic mat (3) at rear-end door	Only vehicles as of 28.04.00
4	Separate electrical connector (4) from door lock
5	Separate electrical connector (5) from CL element of rear-end door	 Do not damage locking tabs as otherwise the connector will no longer be locked into place.  Installation: Observe arrest of electrical connector (5).
6	Remove from below main wiring harness from brackets and guides
7	Unscrew bolts (6) at door check strap with latch striker (7) on left and right on body	 Support rear-end door (1).
			*BA72.20-P-1001-02E
8	Unscrew nuts (8) from rear-end door hinge on body on left and right		*BA72.20-P-1003-02E
		 Installation: Adjust rear-end door (1) and check gap dimensions 
		Adjust bottom section of rear-end door	AR72.20-P-3510SM
9	Remove rear-end door (1)
10	Install in the reverse order

 Tailgate

Number	Designation		Model 450.3


BA72.20-P-1001-02E	Screw for catch strap on body	Nm	30
BA72.20-P-1003-02E	Nut for rear-end door hinge on body	Nm	43