P72.18-2013-09
3 Bolts
4 Bolts
6 Expansion rivets
5 Bolts
P72.18-2012-04
1 Door paneling
2 Bolt
| Remove/Install | ||
1 | Remove antenna rod | ||
2 | Unscrew bolts (3) from fender at top | ||
3 | Unscrew bolts (4) for fender from A-pillar | Open door | |
4 | Unscrew bolts (5) at bottom of door entry | ||
5 | Remove expansion rivet (6) from bottom wheelhouse paneling | Turn wheels | |
6 | Unhook fender from assembly stop | Do not damage lock tabs on assembly stop, otherwise the CBS front can no longer be guided Slightly pull rear fender upward and toward outside. | |
7 | Remove complete rearview mirror | On vehicles with code (V21) Electrically adjustable and heated outside mirror (FFO). | |
On vehicles except code (V21) Electrically adjustable and heated outside mirror (FFO). | |||
8 | Remove exterior door handle on front door | ||
9 | Unscrew bolt (2) | ||
10 | Remove retractable window seal on door paneling (1) upward | Open window. | |
11 | Slightly press in door paneling (1) from outside and slide upward (arrows). | The door paneling (1) then comes out of the retaining rail at top Installation: Press against bottom edge of door paneling (1) from bottom until door paneling (1) arrests at top. | |
12 | Loosen door paneling (1) from side arrest | ||
13 | Remove door paneling (1) downward. | Installation: First hook door paneling (1) in at front bottom. | |
14 | Install in the reverse order | ||
15 | Check gaps on hoods, doors and covers, adjust if necessary | Gaps on hoods, doors and lids | |
Model 452.3 | |||
Model 452.4 | |||
|
Test and adjustment values for gaps
Number | Designation | Model | Model | |||
BE60.00-P-1002-01J | Gap dimensions | Front door to front fender | Dimension "D" | mm | 6.0 (1.5) | 6.0 (1.5) |
Roll down window to side strut/hard top | Dimension "E" | mm | 9.0 (2.0) | 9.0 (2.0) | ||
Front door to bottom side wall | Dimension "F" | mm | 7.0 (2.0) | 7.0 (2.0) | ||
Front door to rear side wall | Dimension "G" | mm | 8.0 (2.0) | 8.0 (2.0) | ||
Front door paneling to A-pillar | Dimension "H" | mm | 5.0 (1.5) | 5.0 (1.5) | ||
Feeler gage
129 589 03 21 00