Shown on model 447.8 with code T55 (Electrical actuation for right sliding door) |
1 | Electrical connectors |
2 | Bolts |
3 | Carrier |
4 | Screw |
S72.16-4646-11
Shown on model 447.8 with code T55 (Electrical actuation for right sliding door) |
5 | Nut |
6 | Bolts |
7 | Bolts |
8 | Guide rail |
S72.16-4647-06
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Remove/install | ||
1 | Remove left or right underfloor paneling |
| |
2 | Remove door sill on left and right sliding door | ||
3 | Remove running board on left and right |
| |
4 | Loosen bracket on electrical connectors (1) from body | Model 447, 448 with energy chain | |
5 | Separate electrical connections (1) | Model 447, 448 with energy chain | |
The number of electrical connections (1) varies depending on equipment installed. | |||
6 | Unscrew bolts (2) | ||
7 | Unscrew bolt (4) | Model 447, 448 with energy chain | |
8 | Move carrier (3) in direction of arrow and remove upward | Model 447, 448 with energy chain | |
9 | Remove lower sliding carriage for sliding door | ||
10 | Unscrew nut (5) from underfloor | Screw/bolt/nut, sliding door guide rail to rocker panel | |
11 | Remove bolts (6) | Screw/bolt/nut, sliding door guide rail to rocker panel | |
12 | Remove bolts (7) | Model 447.6 | |
13 | Mask entry in working area with adhesive tape | ||
14 | Remove guide rail (8) | ||
15 | Install in the reverse order | ||
| Check | ||
16 | Check sliding door for proper function |
Powiązane dokumenty
- ar6130s1001e
- ar6830s1312e
- ar7216s7844e
- ar8830s2400e
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.