Remove/install upper rotary tumbler on sliding door

AR72.16-D-4034TS

Remove/install upper rotary tumbler on sliding door

18.06.2018

Model

907.6/7, 910.6

Modification notes

04.06.2018

Normalization of electric sliding door added.

Operation step 7

Shown on model 907.6 with code T55 (electrical actuation for right sliding door)

15

Release

Shown on right sliding door (2)

1

Upper rotary tumbler

4

Lever

7

Cable

2

Sliding door

5

Long wedge

A

Arrow direction

3

Screw

6

Cable

B

Arrow direction

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

 

Remove/install

1

Open sliding door (2).

2

Set release (15) to "MAN" position using a suitable screwdriver.

Model 907.6/7
with code T55 (Electric operation of sliding door on right)
Model 907.6/7
with code T56 (Electric operation of sliding door on left)

 This deactivates the electric drive of the sliding door (2).

3

Remove screw/bolts (3).

 Bolt, rotary tumbler at top to sliding door

*BA72.16-N-1001-01TS

4.1

Press lever (4) in direction of arrow (A) with fingers and remove upper rotary tumbler (1) from sliding door (2).

Model 907.6/7
except code T50 (Electrical closing assist for right sliding door)
except code T51 (Electrical closing assist for left sliding door)
except code T55 (Electric operation of sliding door on right)
except code T56 (Electric operation of sliding door on left)
Model 910.6

4.2

Press lever (4) in direction of arrow (B) with a long wedge (5) and remove upper rotary tumbler (1) from sliding door (2).

Model 907.6/7
with code T50 (Electrical closing assist for right sliding door)
Model 907.6/7
with code T51 (Electrical closing assist for left sliding door)
Model 907.6/7
with code T55 (Electric operation of sliding door on right)
Model 907.6/7
with code T56 (Electric operation of sliding door on left)

 Long wedge

*115589035900

5.1

Unhook cable (6) and remove upper rotary tumbler (1).

Model 907.6/7
except code T50 (Electrical closing assist for right sliding door)
except code T51 (Electrical closing assist for left sliding door)
except code T55 (Electric operation of sliding door on right)
except code T56 (Electric operation of sliding door on left)
Model 910.6

5.2

Unhook cables (6, 7) and remove upper rotary tumbler (1).

Model 907.6/7
with code T50 (Electrical closing assist for right sliding door)
Model 907.6/7
with code T51 (Electrical closing assist for left sliding door)
Model 907.6/7
with code T55 (Electric operation of sliding door on right)
Model 907.6/7
with code T56 (Electric operation of sliding door on left)

6

Install in the reverse order.

7

Completely open and close sliding door (2) twice with corresponding push button switch.

Model 907.6/7
with code T55 (Electric operation of sliding door on right)
Model 907.6/7
with code T56 (Electric operation of sliding door on left)

 For normalizing the electric drive of the sliding door (2).
Keep push button switch pressed throughout normalization run.



Check

8

Perform function check of upper rotary tumbler (1).

 Sliding door

Number

Designation

Model 907.6/7, 910.6

BA72.16-N-1001-01TS

Bolt, rotary tumbler at top to sliding door

Nm

10