Remove/install rear door module

AR72.12-P-0103FR

Remove/install rear door module

22.05.2018

Model

257, 290

Shown on removed rear door with code 889 (KEYLESS-GO)

1

Door module

10

Door wiring harness

3

Screw

11

Grommet

4

Bearing bracket

12

Linkage rod

5

Bolts

13

Grommet

6

Rear door

A85/3

Left rear door lock

7

Grommet

A85/4

Right rear door lock

8

Adjustment screw

X35/3

Left rear door electrical connector

9

Nut

X35/4

Right rear door electrical connector

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove rear door triangular window.

AR67.30-P-2570FR

2

Remove outside door handle.

AR72.12-P-2410FR

3

Release screws (3).

4

Slide bearing bracket (4) forwards and detach from rear door (6).

5

Remove grommets (7).

6

Unscrew nuts (9) at setting screws (8) of window lifter.

 Do not twist adjustment screws (8).

 Socket

*209589000903

 Socket wrench

*209589000900

7

Disconnect ground line from battery.

AR54.10-P-0003FR

8

Disconnect rear door electrical connector (X35/3, X35/4).

9

Guide door wiring harness (10) with grommet (11) out of rear door (6) and door module (1).

10

Remove grommet (13).

11

Unclip linkage (12) at rear door lock (A85/3, A85/4).

12

Unscrew screws (5) at rear door lock (A85/3, A85/4).

 Bolt, door lock to rear door

*BA72.12-P-1005-01R

13

Remove screws (arrows) at door module (1).

14

Remove door module (1) from rear door (6).

 Long wedge

*115589035900

15

Install in the reverse order.

 Rear door

Number

Designation

Model 257

Model 290

BA72.12-P-1005-01R

Bolt, door lock to rear door

Nm

7

7