Remove/install sealing for side window on rear door

AR72.12-P-0001MFA

Remove/install sealing for side window on rear door

27.09.2019

Model

177.0/1/9, 247.6/7

Modification notes

14.08.2019

Remove/install upper trim element.

Operation steps 4 and 23.

Shown on model 177.0

1

Seal

2

Outer sealing rail

3

Bolts

4

Cover

5

Inner sealing rail

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A



Remove

1

Remove left or right door trim.

AR72.12-P-1011MFA

2

Remove inner sealing rail (5).


Carefully remove inner sealing rail (5).
Otherwise, the inner sealing rail (5) will be deformed.

 Long wedge

*115589035900

If the inner sealing rail (5) is bent:



Replace inner sealing rail (5).

3

Remove outer sealing rail (2).


Carefully remove outer sealing rail (2).
Otherwise, the outer sealing rail (2) will be deformed.

 Long wedge

*115589035900

If the outer sealing rail (2) is bent:



Replace outer sealing rail (2).

4

Remove upper trim element at seal (1).

Model 177.0/1/9, 247.6/7
with code 950 (AMG Sports package)
with code P59 (Progressive)

 Long wedge

*115589035900

5

Pull front section (B) of seal (1) out of window guide.

6

Remove screws (3) of cover (4).

7

Remove cover (4) from window frame in upward direction.

8

Loosen seal (1) on section C in front area and pull off in direction of travel.

 Otherwise, there is a danger that the window guide seal will tear down in the area of the fixed side window.

9

Pull rear section (A) of seal (1) out of window guide.

10

Pull upper section (C) off of door frame.



Clean

11

Clean contact surfaces of seal (1) on rear door.

Cleaner

*BR00.45-Z-1025-04A



Install

12

Slide on seal (1), starting at the corner points (D and E).


Ensure that sealing (1) is seated correctly.
The seal (1) may otherwise be damaged.

13

Wet upper section (C) with lubricant, position on window frame and align.

 Carefully handle seal (1).

 The seal (1) can bend very easily in the upper section (C).

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

If the seal (1) is bent:



Replace the seal (1).

14

Slide cover (4) onto window frame from above.

15

Tighten bolts(3).

16

Insert upper section (C) of seal (1) in window frame.

 Ensure that the section (F) is laid around the window frame properly.

17

Wet rear section (A) of seal (1), which will be below the beltline after installation, with lubricant.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

18

Slide rear section (A) of seal (1) downward along guide of side window.

 Ensure that there are no gaps between it and the window frame.

19

Wet front section (A) of seal (1), which will be below the beltline after installation, with lubricant.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

20

Slide front section (A) of seal (1) downward along guide of side window.

21

Install outer sealing rail (2).

22

Install inner sealing rail (5).

23

Install upper trim element at seal (1).

Model 177.0/1/9, 247.6/7
with code 950 (AMG Sports package)
with code P59 (Progressive)

24

Install left or right rear door trim.

AR72.12-P-1011MFA

Concluding tasks

25

Close side window and check correct seating of seal (1).

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67

BR00.45-Z-1025-04A

Cleaner

A 005 989 19 71