ar7210s6580e

Remove/install inner paneling at window frame of front door

Typ ar · temat 72.10 · wersja 0103 · 2017-03-13

Dotyczy: Model 447 Model 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.10 Drzwi przednie — Seria 447 · Seria 448

EinPAS 37 Wyposażenie wnętrza › 37.45 Okładzina › 37.45.31 Okładzina drzwi — Seria 447 · Seria 448

AR72.10-S-6580E

Remove/install inner paneling at window frame of front door

02.03.2017

Model

447

Model

448

Remove/install inner paneling at window frame of front door

S72.10-4612-08

1

Cover

2

Retaining clips

3

Door trim

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Unclip paneling (1) starting at rear (arrow) from retaining clips (2)

Installation: Ensure that paneling (1) is seated correctly.

Long wedge

*115589035900

2

Guide out rear paneling (1) (arrow) behind door panel (3) upward and remove


Carefully guide out sharp-edged molding of paneling (1) behind door panel (3).
Otherwise the door panel (3) can be damaged.

3

Check retaining clips (2) for damage and correct seat in window frame

If damaged or seated incorrectly

Replace corresponding retaining clips (2) and position correctly..

4

Install in the reverse order

Remove/install inner paneling at window frame of front door

115 589 03 59 00

Long wedge

Powiązane dokumenty