ar7210s6580e

Remove/install inner paneling at window frame of front door

Type ar · topic 72.10 · version 0103 · 2017-03-13

Applies to: Model 447 Model 448

Where it sits

Function group 3 Body › 72 Doors › 72.10 Front door — Series 447 · Series 448

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.31 Door trim — Series 447 · Series 448

AR72.10-S-6580E

Remove/install inner paneling at window frame of front door

02.03.2017

Model

447

Model

448

Remove/install inner paneling at window frame of front door

S72.10-4612-08

1

Cover

2

Retaining clips

3

Door trim

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Unclip paneling (1) starting at rear (arrow) from retaining clips (2)

Installation: Ensure that paneling (1) is seated correctly.

Long wedge

*115589035900

2

Guide out rear paneling (1) (arrow) behind door panel (3) upward and remove


Carefully guide out sharp-edged molding of paneling (1) behind door panel (3).
Otherwise the door panel (3) can be damaged.

3

Check retaining clips (2) for damage and correct seat in window frame

If damaged or seated incorrectly

Replace corresponding retaining clips (2) and position correctly..

4

Install in the reverse order

Remove/install inner paneling at window frame of front door

115 589 03 59 00

Long wedge

Referenced documents