ar7210p1035fr

Remove/install front door armrest

Typ ar · temat 72.10 · wersja 0200 · 2020-07-30

Dotyczy: Model 257, 290

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.10 Drzwi przednie — Seria 257 · Seria 290

EinPAS 37 Wyposażenie wnętrza › 37.45 Okładzina › 37.45.31 Okładzina drzwi — Seria 257 · Seria 290

AR72.10-P-1035FR

Remove/install front door armrest

14.07.2020

Model

257, 290

Modification notes

13.07.2020

Document revised completely.

Remove/install front door armrest

P72.10-A071-09

Shown on model 257

1

Door trim

3

Catch tabs

2

Armrest

4

Plastic spot weld (24x)

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove left/right door trim (1).

AR72.10-P-6575FR

2

Remove driver's side power window assembly switch group and outside mirror adjustment (S20) or right front power window assembly switch group (S20s2).


Do not crush or kink or subject electric lines to tension.
This will result in damage to the electric lines and can impair their function.

3.1

Drill plastic spot welds (4).

If the armrest (2) is fastened using plastic spot welds (4).

AR72.00-P-0001-01LW

Installation: Replace drilled out plastic spot welds(4) with screws.

3.2

Unscrew screws from armrest (2).

If the armrest (2) is fastened using screws.

4

Release and disconnect electrical connector on armrest (2).

Model 257, 290
with code 906 (Front armrest heater)

5

Release and remove armrest (2) from the catch tabs (3).

6

Install in the reverse order.

Powiązane dokumenty