P72.10-2720-09
1 Door lining
2 Side paneling
3 Door wiring harness connector
4 Door paneling
9 Inside door opener
10 Door lock connector
11 Connector, power window motor
5 Door wiring harness
6 Inside door handle
7 Bolts
8 Bowden cable
| Remove/Install | ||
1 | Remove door paneling | ||
2 | Remove side paneling (2) in footwell | ||
3 | Disconnect connector from door wiring harness (3) | ||
4 | Unclip paneling from door (4) | Thereby unhook door wiring harness (5) from paneling. | |
5 | Pull door wiring harness (5) through opening in A-pillar toward outside. | Installation: Ensure that grommet is seated properly. | |
6 | Remove cover from inner door handle (6) | Unclip at top | |
7 | Unscrew bolts (7) from inner door handle (6) and remove inner door handle (6) | ||
8 | Unhook Bowden cable (8) from inside door opener (9) | ||
9 | Disconnect door lock connector (10) | ||
10 | Unclip door liner (1) | Installation: Replace damaged retaining clamps. | |
11 | Disconnect power window motor connector (11) | ||
12 | Remove liner (1) | Installation: Ensure that door wiring harness is routed properly. | |
13 | Install in the reverse order |