Remove/install front door lock

AR72.10-D-4011NA

25.11.09

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

D72.10-1105-06

1 Door lock

2 Motor (central locking)

3 Release cable

4 Torx screw

5 Rubber grommet

6 Connector (light blue)

7 Connector (yellow)

 	Remove/install
1	Remove door trim	With code V50, two power windows.	AR72.15-D-2150NB
		Except code V50, two power windows.	AR72.15-D-2150NA
2	Pull rubber grommet (5) out between door and A-pillar
3.1	Disconnect connectors (6, 7) and expose electrical lead	 With code FY6, central locking with radio remote control.
		 Installation: Observe routing of electric leads.
4	Unscrew Torx bolts (4) for door lock (1)	 Installation: Replace self-locking Torx screws (4).
			*000589011000
			*BA72.15-N-1011-01A
5	Remove door lock (1) from front door	 Installation: Ensure that lever (arrow) on door lock is positioned behind door handle lever.
6	Detach unlocking cable (3) at door lock (1)
7	Install in the reverse order

 Hinged doors

Number	Designation		Model WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7	Model 690.6, 901, 902, 903, 904, 905


BA72.15-N-1011-01A	Bolt, door lock to hinged door	Nm	10	10

000 589 01 10 00

Torx bit set