AR72.15-D-2150NB | Remove/install door paneling on hinged door | 3.9.01 |
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (V50) Power windows (2 doors)
MODEL 903.61 /66 /67, 904.61 /66
with CODE (V50) Power windows (2 doors)
with CODE (ZU7) National version for Canada
MODEL 903.61 /66 /67, 904.61 /66
with CODE (V50) Power windows (2 doors)
with CODE (ZU8) National version for USA
MODEL 903.61 /62 /66 /67, 904.61 /62 /66
with CODE (V50) Power windows (2 doors)
with CODE (ZU9) National version for Mexico
D72.15-1116-09
1 Handle recess
2 Switch cover
3 Bolt
7 Fuse
8 Cable
4 Door pocket
5 Door paneling
6 Window frame lining
| Remove/install | ||
1 | Remove handle recess (1) | Press retaining clip upward through cutout in handle recess with screwdriver | |
2 | Unclip switch cover (2) and disconnect connector | A different number of switches may be fitted depending on vehicle equipment. | |
Installation: Route leads below control cable for door opener. | |||
3 | Unscrew bolts (3) | ||
4 | Fold open door pocket (4) | ||
5 | Remove window frame lining (6) | Lining is clipped. | |
6 | Slightly pull door paneling (5) upward and swing away only slightly | The door opening lever is still connected with the cable (8). | |
7 | Unlock retainer (7) and unclip cable (8) from door opening lever and door paneling | ||
8 | Remove door paneling (5) | ||
9 | Install in the reverse order |