ar7210d1406ts

Remove/install cable for internal operation

Typ ar · temat 72.10 · wersja 0100 · 2018-07-06

Dotyczy: Model 907, 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.10 Drzwi przednie — Seria 907 · Seria 910

EinPAS 29 System uprawniający do jazdy/zabezpieczający › 29.16 Blokowanie/ odblokowanie › 29.16.32 Zamek/ klamka — Seria 907 · Seria 910

AR72.10-D-1406TS

Remove/install cable for internal operation

21.06.2018

Model

907, 910

Remove/install cable for internal operation

D72.10-1157-79

Shown on left front door

1

Door lock

3

Screw

5

Cable

2

Bearing bracket

4

Bolts

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Move side window of front door completely to top.

2

Remove adhesive film from inner door panel of front door.

AR72.10-D-1011TS

3

Remove outside door handle of front door.

AR72.10-D-2400TS

4

Loosen screw (3), but do not remove.

Bolt, hinge strap to front door

*BA72.10-N-1006-01TS

5

Unscrew screw/bolts (4).

Screw/bolt, door lock to front door

*BA72.10-N-1008-01TS

6

Remove door lock (1) with bearing bracket (2) from front door until cable (5) is accessible.

7

Remove cable (5) from door lock (1).

8

Install in the reverse order.

Front door

Number

Designation

Model 907

Model 910

BA72.10-N-1006-01TS

Bolt, hinge strap to front door

Nm

2,5

2,5

Front door

Number

Designation

Model 907

Model 910

BA72.10-N-1008-01TS

Screw/bolt, door lock to front door

Nm

10

10

Powiązane dokumenty