Remove/install side headliner

AR68.30-S-4302E

Remove/install side headliner

04.11.2015

Model

447.7/8

with code ZK9 (Lifting roof hatch)

Model

447.8

with code ZK0 (EASY UP pop-up roof, electric)

Shown on left side of vehicle on vehicle with code HZ7 (Semi-automatic A/C, controlled, TEMPMATIC in rear)

1

Side headliner

4

B-pillar paneling

2

Side roof cutout paneling

5

Mounting clip

3

Front foot cutout paneling

 Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove side roof cutout paneling (2)

AR77.70-S-0022E

2

Remove air vents

Model 447.7/8
with code HZ7 (TEMPMATIC semi-automatic air conditioning in rear)
with code ZK9 (Lifting roof hatch)
Model 447.8
with code HZ7 (TEMPMATIC semi-automatic air conditioning in rear)
with code ZK0 (EASY UP pop-up roof, electric)

AR83.10-S-4800E

3

Remove dome lamp in side roof paneling (1)

Model 447.8
with code ZK0 (EASY UP pop-up roof, electric)
with code ZK7 (Equipment line MARCO POLO)

AR82.20-S-0113E

4

Remove C-pillar paneling

Model 447.7
with code V23 (Interior panelling higher execution)
with code ZK9 (Lifting roof hatch)
Model 447.8
with code ZK0 (EASY UP pop-up roof, electric)
Model 447.8
with code ZK9 (Lifting roof hatch)

AR68.30-S-4490E

5

Remove corresponding roller sun blind for side window

Model 447.8
with code ZK0 (EASY UP pop-up roof, electric)
with code ZK7 (Equipment line MARCO POLO)
Model 447.8
with code ZK7 (Equipment line MARCO POLO)
with code ZK9 (Lifting roof hatch)

AR68.50-S-0004E

6

Loosen retaining clips (5) in roof cutout of rear dome lamp, lower side roof paneling (1) at rear, guide out toward rear and remove

 Do not remove roof cutout paneling (3) and B-pillar paneling (4).

 Installation: Ensure that window and door frame seal are seated correctly.

 Clip remover

*452589016300

7

Install in the reverse order