Remove/install dome lamp in rear passenger compartment

AR82.20-S-0113E

Remove/install dome lamp in rear passenger compartment

21.04.2017

Model

447.8

with code ZK7 (Equipment line MARCO POLO)

Shown on left side of vehicle

2

Clip remover

E15/15

Left kitchen interior lamp

3

Electrical connectors

E15/16

Right sliding door interior lamp

2

Clip remover

E15/14

Center rear interior lamp

5

Electrical connector

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Release left kitchen interior lamp (E15/15) or right sliding door interior lamp (E15/16), as shown, with clip remover (2) in rear area

When removing left kitchen interior lamp (E15/15) or right sliding door interior lamp (E15/16).

 Clip remover

*452589016300

2

Remove left kitchen interior lamp (E15/15) or right sliding door interior lamp (E15/16) until electrical connectors (3) are accessible

When removing left kitchen interior lamp (E15/15) or right sliding door interior lamp (E15/16).

3

Disconnect electrical connectors (3) and remove left kitchen interior lamp (E15/15) or right sliding door interior lamp (E15/16)

When removing left kitchen interior lamp (E15/15) or right sliding door interior lamp (E15/16).

4

Unclip center rear interior lamp (E15/14) using a clip remover (2) (arrows) and remove until electrical connector (5) is accessible

When removing center rear interior lamp (E15/14).

 Clip remover

*452589016300

5

Disconnect electrical connector (5) and remove center rear interior lamp (E15/14)

When removing center rear interior lamp (E15/14).

6

Install in the reverse order



Check

7

Carry out function check of left kitchen interior lamp (E15/15) or right sliding door interior lamp (E15/16) or of center rear interior lamp (E15/14)