P68.30-2417-06
Shown on vehicles with code (819) CD changer
1 Luggage box
2 Cover
3 Bolts
4 Guides
5 Pin
6 Wiring harness
7 Vacuum line
| Remove/Install | ||
1 | Remove rear wall paneling | ||
2 | Unscrew screws (3) at luggage box (1) | ||
3 | Raise side cover (2) slightly (arrow), remove luggage box (1) together with guides (4) out of bolts (5) upward and lay down to side with lines connected. | Do not damage cover (2) because it is still screwed in the front area. Installation: Ensure that guides (4) are seated correctly above bolts (5). | |
4 | Separate connector from wiring harness (6) | ||
5 | Cut off vacuum line (7) below luggage box (1) | Installation: Connect separated vacuum line (7) with suitable vacuum hose | |
6 | Take out luggage box (1) | On vehicles with code (819) CD changer, remove CD player with changer when replacing luggage box (1).See | |
Remove/install CD player with changer | |||
7.1 | Remove luggage box cover (1) in rear | Only if necessary. | |
8 | Install in the reverse order |