ar6830p7440r

Remove/install rear luggage box

Type ar · topic 68.30 · version 0103 · 2005-01-17

Applies to: MODEL 230.467 /474 /475 /476 up to 14.1.04

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 230 (models 467, 474, 475, 476)

EinPAS 37 Interior equipment › 37.55 Stowage/container/holder › 37.55.40 Luggage shelf/stowage compartment/stowage compartment/container — Series 230 (models 467, 474, 475, 476)

AR68.30-P-7440R

Remove/install rear luggage box

29.6.01

MODEL 230.467 /474 /475 /476 up to 14.1.04

Remove/install rear luggage box

P68.30-2417-06

Shown on vehicles with code (819) CD changer

1 Luggage box

2 Cover

3 Bolts

4 Guides

5 Pin

6 Wiring harness

7 Vacuum line

Remove/Install

1

Remove rear wall paneling

AR68.30-P-4750R

2

Unscrew screws (3) at luggage box (1)

3

Raise side cover (2) slightly (arrow), remove luggage box (1) together with guides (4) out of bolts (5) upward and lay down to side with lines connected.

Do not damage cover (2) because it is still screwed in the front area.

Installation: Ensure that guides (4) are seated correctly above bolts (5).

4

Separate connector from wiring harness (6)

5

Cut off vacuum line (7) below luggage box (1)

Installation: Connect separated vacuum line (7) with suitable vacuum hose

6

Take out luggage box (1)

On vehicles with code (819) CD changer, remove CD player with changer when replacing luggage box (1).See

Remove/install CD player with changer

AR82.64-P-7507R

7.1

Remove luggage box cover (1) in rear

Only if necessary.

AR68.30-P-7440-01R

8

Install in the reverse order

Referenced documents