Remove/install side paneling in trunk

AR68.30-P-4800SR

Remove/install side paneling in trunk

13.08.2014

MODEL

453.0

1.1

Upper trim panel

4

Cover

8

Edge guard

1.2

Lower trim panel

5

Edge guard

E18/1

Load compartment lamp

2

Cover

6

Screw

3

Adjustable backrest lock striker

7

Screw



Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and remove key from ignition lock

2

Remove cargo space cover

3

Remove woofer

MODEL 453.0 (except 453.041)
with CODE SOUND (JBL sound system)

4

Fold over rear backrest

5

Loose edge guard (5) in area of upper paneling (1.1)

 Installation: Ensure that the edge guard (5) is properly seated.

6

Loosen edge guard (8) in area of upper paneling (1.1) and lower paneling (1.2)

 Installation: Ensure that the edge guard (8) is properly seated.

7

Remove adjustable backrest lock striker (3)

8

Unclip upper paneling (4)

9

Remove the screw (6) and remove belt end fitting

 Screw/bolt, belt end fitting to C-pillar

*BA91.40-P-1010-01SR

10

Unclip cover (2) and unscrew bolt (7)

11

Unclip upper paneling (1.1) and disconnect electrical connector from cargo area lamp (E18/1)

12

Remove upper paneling (1.1) together with lower paneling (1.2)

 Installation: Ensure that upper paneling (1.1) is seated correctly on lower (1.2) (arrows).

13

Remove cargo area lamp (E18/1)

When replacing upper paneling (1.1).

14

Install in the reverse order

 Seat belts/emergency tensioning retractors

Number

Designation

MODEL 453.0

BA91.40-P-1010-01SR

Screw/bolt, belt end fitting to C-pillar

Nm

21