Shown on the right-hand side |
1 | Cover |
2 | Cover |
3 | Clamping bolt |
4 | Trim strip |
6 | Cover |
7 | Door seal |
P68.30-3614-06
Shown on the right-hand side |
5 | Bolts |
6 | Cover |
7 | Door seal |
8 | Clips |
9 | Bolts |
10 | Cover |
H4/7 | Left rear speaker |
H4/8 | Right rear speaker |
P68.30-3629-06
| Remove/install | ||
1 | Open Vario roof | ||
2 | Move driver and front passenger seat toward front to end position | ||
3 | Carefully unclip paneling (1) in direction of arrow (arrow A) and lay down to side | Installation: Before installing paneling (1), unclip cover (2) and detach clamp bolt (3). Then install paneling (1), tighten clamp screw (3) and reinstall cover (2). | |
4 | Remove door sill molding | Remove/install door sill molding | |
5 | Unclip trim (4) toward front and remove | Mounting wedge | |
6 | Unclip cover (10) upward and remove | When removing right paneling (6). | |
7 | Open rear luggage box | When removing left paneling (6). | |
8 | Remove screw/bolts (9) | When removing right paneling (6). | |
9 | Remove screw/bolts (5) | ||
10 | Remove door seal (7) in area of trim (6) | Installation: Ensure that paneling (6) is seated correctly in door seal (7). | |
11 | Unclip trim (6) in direction of arrow (arrow B) and remove toward front | Remove paneling (6) only until electrical connector on right rear speaker (H4/8) or left rear speaker (H4/7) is accessible. | |
Installation: Replace damaged clips (8). | |||
Mounting wedge | |||
12 | Disconnect electrical connector from left rear speaker (H4/8) or right rear speaker (H4/7) | ||
13 | Remove paneling (6) | ||
14 | Install in the reverse order |
110 589 03 59 00
Mounting wedge