Remove/install load compartment inner side paneling

AR68.30-P-1180RFW

Remove/install load compartment inner side paneling

07.11.2018

Model

253.992/993

Shown on left side of vehicle

3

Load compartment floor

4

Rear center section paneling

5

Side load compartment paneling

6

Luggage net

Shown on left side of vehicle

5

Side load compartment paneling

7

Tie-down eye

8

Electrical connector

9

Electrical connector

10

Piece of carpeting

S54/11

Left rear backrest release button

X58/12

Luggage compartment socket

 Danger

Risk of explosion caused by escaping hydrogen or overheating of the fuel tanks when working on the hydrogen system. Risk of frostbite to body parts caused by escaping gas and by touching component parts carrying gas when emptying fuel tanks. Risk of asphyxiation caused by inhalation of air diluted by hydrogen. Risk of burn injuries by coming into contact with an invisible pale blue hydrogen flame.

AS00.00-Z-0030-01B

Topical note

Notes on fuel cell system

AH00.00-P-0022-01RFW

 

Remove/install

1

Ensure that the prerequisites for driving into the workshop are fulfilled.

Topical note

Requirements for driving into the workshop

AH00.00-P-0021-01RFW

2

Print out "tank system, fuel cell, form event log," fill out, and attach to the vehicle somewhere clearly visible.



OF00.00-P-3000-21RFW

3

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

4

Remove load compartment floor (3).

AR68.80-P-5800RFW

5

Remove rear-end center-section trim (4).

AR68.30-P-4785LWS

6

Unclip luggage net (6) at bottom.

When removing left side load compartment trim (5).

7

Unclip carpet section (10) and remove.

8

Remove tie-down eyes (7) at side load compartment trim (5).

 Screw/bolt for tie-down eye

*BA68.50-P-1001-03I

9

Unclip side load compartment trim (5) starting from bottom rear.


Carefully unclip side load compartment trim (5).
Electrical connectors (8, 9) located underneath can otherwise be damaged.

10

Disconnect electrical connectors (8, 9).

 The number of electrical connectors (8, 9) can vary depending on equipment installed.

11

Transfer right rear seat backrest release button (S54/12) and/or left rear seat backrest release button (S54/11).

When replacing side load compartment trim (5).

12

Transfer trunk socket (X58/12).

When replacing left side load compartment trim (5).

13

Install in the reverse order.

 Cargo retainers

Number

Designation

Model 253

BA68.50-P-1001-03I

Screw/bolt for tie-down eye

Nm

24