Remove/install rear center headliner

AR68.30-D-7612TSR

Remove/install rear center headliner

17.07.2018

Model

907.6/7

Shown on rear center roof lining section (1.1) on model 907.7 with code IR6 (wheelbase 4,325 mm, overhang 1,615 mm)

1.1

Rear center roof lining section

2

Center headliner

5

Lugs

1.2

Rear center roof lining section

3

Retaining clips

1.3

Rear center roof lining section

4

Expansion rivet

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove corresponding dome lamp.

If required.

AR82.20-D-0117TSR

 The sections (1.1, 1.2, 1.3) can be removed independently of each other and in the same manner.
The number of sections (1.1, 1.2, 1.3) varies depending on the wheelbase and overhang.

2

Remove corresponding air duct of the roof-mounted air conditioning system.

Model 907.6/7
with code H08 (Roof-mounted air conditioning system, reinforced)
Model 907.6/7
with code HH7 (Roof-mounted air conditioning system, basic)
Model 907.6/7
with code HK4 (Rear air conditioning, reinforced)

AR83.50-D-7980TSR

3

Unclip retaining clips (3) of the rear center roof lining front section (1.2) and carefully pull downward.

 Installation: Replace damaged retaining clips (3).

 Clip remover

*452589016300

4

Remove expansion rivet (4) from rear center roof lining section (1.1).

 Clip remover

*452589016300

5

Unclip retaining clips (3) of the rear center roof lining section (1.1) at the rear.

 Installation: Replace damaged retaining clips (3).

 Clip remover

*452589016300

6

Unhook shackles (5) of the rear center roof lining section (1.1) sideways out of the body.

7

Carefully lower rear center roof lining section (1.1) at the rear and remove from the vehicle.

8

Install in the reverse order.



Check

9

Perform function test of the dome lamps.

If a dome lamp was removed.